BWBV0001512
Geldig vanaf 05-03-2002
Artikel 1
Overeenkomst betreffende de vaststelling van mondiale technische reglementen voor wielvoertuigen, uitrustingsstukken en onderdelen die kunnen worden aangebracht en/of gebruikt op wielvoertuigen
1.1. The purpose of this Agreement is:
1.1.1. To establish a global process by which Contracting Parties from all regions of the world can jointly develop global technical regulations regarding the safety, environmental protection, energy efficiency, and anti-theft performance of wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles;
1.1.2. To ensure that, in developing global technical regulations, due and objective consideration is given to the existing technical regulations of Contracting Parties, and to the UN/ECE Regulations;
1.1.3. To ensure that objective consideration is given to the analysis of best available technology, relative benefits and cost effectiveness as appropriate in developing global technical regulations;
1.1.4. To ensure that the procedures used in developing global technical regulations are transparent;
1.1.5. To achieve high levels of safety, environmental protection, energy efficiency, and anti-theft performance within the global community, and to ensure that actions under this Agreement do not promote, or result in, a lowering of these levels within the jurisdiction of Contracting Parties, including the subnational level;
1.1.6. To reduce technical barriers to international trade through harmonizing existing technical regulations of Contracting Parties, and UN/ECE Regulations, and developing new global technical regulations governing safety, environmental protection, energy efficiency and anti-theft performance of wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles, consistent with the achievement of high levels of safety and environment protection and the other above-stated purposes; and
1.1.7. To ensure that, where alternative levels of stringency are needed to facilitate the regulatory activities of certain countries, in particular developing countries, such needs are taken into consideration in developing and establishing global technical regulations.
1.2. This Agreement is to operate in parallel with the 1958 Agreement, without affecting the institutional autonomy of either Agreement.
1.1.1. To establish a global process by which Contracting Parties from all regions of the world can jointly develop global technical regulations regarding the safety, environmental protection, energy efficiency, and anti-theft performance of wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles;
1.1.2. To ensure that, in developing global technical regulations, due and objective consideration is given to the existing technical regulations of Contracting Parties, and to the UN/ECE Regulations;
1.1.3. To ensure that objective consideration is given to the analysis of best available technology, relative benefits and cost effectiveness as appropriate in developing global technical regulations;
1.1.4. To ensure that the procedures used in developing global technical regulations are transparent;
1.1.5. To achieve high levels of safety, environmental protection, energy efficiency, and anti-theft performance within the global community, and to ensure that actions under this Agreement do not promote, or result in, a lowering of these levels within the jurisdiction of Contracting Parties, including the subnational level;
1.1.6. To reduce technical barriers to international trade through harmonizing existing technical regulations of Contracting Parties, and UN/ECE Regulations, and developing new global technical regulations governing safety, environmental protection, energy efficiency and anti-theft performance of wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles, consistent with the achievement of high levels of safety and environment protection and the other above-stated purposes; and
1.1.7. To ensure that, where alternative levels of stringency are needed to facilitate the regulatory activities of certain countries, in particular developing countries, such needs are taken into consideration in developing and establishing global technical regulations.
1.2. This Agreement is to operate in parallel with the 1958 Agreement, without affecting the institutional autonomy of either Agreement.
- Citeren als
- Art. 1
- Geldig vanaf
- Status
- Geldend recht
- Identificatie
- BWBV0001512
- Officiële bron
- wetten.overheid.nl